Pre-cleaning of cotton linters
With the help of a transport fan, the lint is fed into the separator, where the lint transported is pneumatically separated from the air and washed off with water.
Dehydration of cleaned linters, drying, baling and packaging
4 Stage of production
Loose:
The bleached linter suspension obtained in the puri cation plant is thickened, then sent to a mass pool, from which it is transported to the inlet box of a double-grid belt press. The linter coming out of the press is transferred to the high pressure press and is carried out between pressing rollers, where water is again pressed out to the residual moisture of the linter. After passing through the high-pressure press, the linter is sent to the air fountain dryer.
Sheet / Roll:
Paper coming out of the dryer is cut into required formats, rolled or cut into sheets, which arestacked and weighed and packaged in a bale and pack.
Production stages
Filling the sealing cylinders and the pressing of raw linters
For further chemical processing, the linter is loaded into perforated stainless steel cylinders and compacted into compact blocks
Chemical processing of raw linter in cooking machines
During chemical treatment the following operations are carried out: - cooking with alkali under pressure; - washing and cooling;
